We are proud to offer FFA-approved brake parts for all of your Aviat Aircraft. We are an aircraft parts distributor and carry everything from brake discs to brake linings to rivets and more. Our brake parts are affordable and can fit almost all Aviat aircraft models, including S-1S, Pitts Special S-1T, S-2, S-2A, S-2B and A-1 Husky.
This application guide is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenance manual, parts catalog or equipment list for optional installations. To convert an original equipment part number to a RAPCO part number, add RA to the beginning of the OEM number. Refer to the FAA-PMA Supplement for installation eligibility.
Rapco Fleet Support manufactures aircraft brake parts for all the Aviat aircraft models listed below. To purchase, please visit our distributor page to find our nearest distributor to you.
| Model | Aircraft Type | Notable Features |
|---|---|---|
| Pitts S-1S | Single-Seat Aerobatic Biplane | Certified model produced by Aerotek for competition aerobatics, featuring a round airfoil section, four ailerons and powered by a 180 hp Lycoming AEIO-360-B4A engine. A total of 61 units were built. |
| Pitts S-1T | Single-Seat Aerobatic Biplane | Factory-built variant equipped with a 200 hp Lycoming AEIO-360-A1E engine and minor changes. A total of 64 units were built. Features four ailerons, symmetrical wings, and a constant-speed propeller. |
| Pitts S-2 | Two-Seat Aerobatic Biplane | Scaled-up version of the S-1 with a tandem two-seat fuselage, powered by a 200 hp Lycoming AEIO-360-B4A engine. |
| Pitts S-2A | Two-Seat Aerobatic Biplane | Built by Aerotek with a 200 hp Lycoming AEIO-360-A1A or -A1E engine and a constant-speed propeller. Later builds have a longer landing gear and a 2-inch wider front cockpit. A total of 259 units were built. |
| Pitts S-2B | Two-Seat Aerobatic Biplane | Variant of the S-2A with a 260 hp Lycoming AEIO-540-D4A5 engine, upper wing auxiliary fuel tank and modifications including moving the landing gear and upper wings forward by six inches. A total of 196 units were built. |
If you have questions about our FAA-PMA products or services, contact us using the link below or call us at (262) 367-6210.
